前言

1.范围

本规范规定了真皮标志产品的要求、合格判定、标志的佩挂、售后服务、包装和运输等。

本规范适用于皮革服装类、皮鞋类、皮件类产品。

2.规范性引用文件

下列文件中的条款通过本规范的引用而成为本规范的条款。凡是注日期的引用文件，其随后所有的修改单（不包括勘误的内容）或修订版均不适用于本标准。凡是不注日期的引用文件，其最新版本适用于本标准。

GB/T 15107－2005旅游鞋

GB/T 16799－1997家具用皮革

QB/T 1002－2005皮鞋

QB/T 1470-1992出口皮鞋、皮拖鞋与室内皮便鞋

QB/T 1332－1991公文箱

QB/T 1333－2004背提包

QB/T 1583－2005皮制手套号型

QB/T 1584－2005日用皮手套

QB/T 1615－2006皮革服装

QB/T 1618－2006皮腰带

QB/T 1619－2006票夹

QB/T 2155－2004旅行箱包

QB/T 2277－1996公事包

QB/T 2822－2006毛皮服装

3.术语和定义

下列术语和定义适用于本规范。

真皮标志Genuine Leather Mark

真皮标志是中国皮革协会在国家工商行政管理总局注册的证明商标，是中、高档皮革和毛皮制品的标志。真皮标志适用于头层天然皮革和天然毛皮制作的产品。凡佩挂真皮标志的产品应具有三个特性：1、该制品是用头层天然皮革或毛皮制作；2、该制品是优质的中高档产品；3、购买该产品消费者享有良好的售后服务。

4.分类

真皮标志产品包括皮革服装类、皮鞋类、皮件类产品。

皮革服装类包括皮革服装、毛皮服装、毛革两用服装等。

皮鞋类包括皮鞋、旅游鞋、皮拖鞋、室内皮便鞋等。

皮件类包括皮制背提包、皮制旅行箱包、皮票夹、皮腰带、皮手套、皮革毛皮饰品和配饰等。

5.要求

5.1面料

真皮标志产品主要面料应是头层皮革、毛皮或毛革，其比例应为面料面积的90％以上（含）。

5.2质量

真皮标志产品应为合格品。

皮革服装、毛革两用服装应符合QB/T 1615－2006合格品的要求。

毛皮服装应符合QB/T 2822－2006合格品的要求。

皮鞋应符合QB/T 1002－2005合格品的要求。

旅游鞋应符合GB/T 15107－2005合格品的要求。

皮拖鞋与室内皮便鞋应符合QB/T1470-1992合格品的要求。

背提包应符合QB/T 1333－2004合格品的要求。

旅行箱包应符合QB/T 2155－2004合格品的要求。

皮票夹应符合QB/T 1619－2006合格品的要求。

皮腰带应符合QB/T 1618－2006合格品的要求。

皮手套应符合QB/T 1584－2005合格品的要求。

皮家具应符合GB/T 16799－1997合格品的要求。

6合格判定

6.1单件产品合格判定按质量要求引用标准中对应的单件产品合格品判定规则判定。

6.2批量产品合格判定按质量要求引用标准中对应的批量产品合格品判定规则判定。

7.真皮标志标牌

7.1真皮标志标牌的规格

真皮标志标牌分A型（7.0cm×10.0cm）和B型(3.5cm×7.0cm)两种规格。

7.2真皮标志标牌的使用

皮革服装类和大型皮件类产品佩挂A型标牌。

皮鞋类、小型皮件类产品佩挂B型标牌。

7.3真皮标志标牌的佩挂

真皮标志标牌应与产品说明标牌一同佩挂。

8.售后服务

8.1售后服务期限

服务期限从产品售出之日起，不得少于3个月。

8.2综合判定

8.2.1在售后服务期限内正常使用出现不合格品特征的产品应判为质量问题。

8.2.2在售后服务期限内非正常使用出现不合格品特征的产品不应判为质量问题。

8.3处理方法

对存在质量问题的产品，按照生产单位（经销单位）明示的售后服务规定办理，或按照

经营所在地的统一规定办理。

9.包装、运输和贮存

真皮标志产品的包装、运输和贮存，应符合质量要求引用标准中对应的包装、运输和

贮存的要求。

Forward

1.Scope

This specified standard defines the requirements of Genuine Leather Mark Products

(referred to as ‘GLM’ thereafter), their technical qualification, labelling, after-sales

service, packaging and transportation etc.

This standard applies specifically to products such as leather garments, leather footwear,leather-goods and leather upholstery, made of grain leather and genuine furs.

2.Normative references

The provisions and items hereto shall, through reference in the specification, be deemed to be construed as part of this specification. Regarding dated references, subsequent amend-ments to, or revision of, any of these publications apply to this GLM Standard only when incorporated in it by amendments or revision. For undated references, the latest edition of the published doctunents will apply.

GB/T 15107 — 2005Sports shoes (trainers)

GB/T 16799 — 1997Upholstery leathers

QB/T 1002 — 2005Leather shoes

QB/T 1470 — 1992Leather shoes, leather slippers and indoor moccasins

Slippers of export type

QB/T 1332 — 1991Attaché cases

QB/T 1333 — 2004Rucksacks and handbags

QB/T 1583 — 2005Leather gloves

QB/T 1584 — 2005Daily dress leather gloves

QB/T 1615 — 2006Leather garments

QB/T 1618 — 2006Leather belts

QB/T 1619 — 2006Wallets

QB/T 2155 — 2004Travelling suitcases

QB/T 2277 — 1996Briefcases

QB/T 2822 — 2006Fur garments

3.Glossary and Definition

Following glossaries and definitions are applied to the Standard:

Genuine Leather Mark (GLM)

Genuine Leather Mark (GLM), is a symbol of leather products from middle to high quality, and a certified trademark registered by China Leather Industry Association (CLIA) with the State Administration for Industry and Commerce.

It applies to products such as leather footwear, leather garments, and leather goods made of grain leather, and genuine furs.

Any products awarded with the GLM certification should demonstrate three characteristics as follows:

1) They are made of grain leather or genuine furs;

2) They are premium products of middle to high quality;

3) They come With a reputable after-sales service;

4.Category

GLM products generally cover three main categories: Leather garments, Leather footwear,

Leather goods.

Leather garments: gannents made of leather or fur including double face.

Leather footwear: leather shoes, sports shoes, leather slippers, moccasins slippers, etc.

Leathergoods: leather handbags, leather travel cases, bags and rucksacks, leather wallets, leather belts, leather gloves, leather or fur ornamented articles and leather accessories.

5.Requirements

5.1Main materials

The main materials of any GLM products should be of grain leather, genuine fur or double-face. Each GLM product should contain minimum 90% or more of the above-mentioned materials.

5.2Quality Standard

All GLM products must be of Grade “A” products. (Not seconds)

Each product must comply with the standards as detailed in the table 1:

Table 1

Product	Standard
Leather garments of full grain/double face	QB/T1615 — 2006
Fur garments	QB/T2822 — 2006
Leather shoes	QB/T1002 — 2005
Sports shoes (Trainers)	GB/T 15107 — 2005
Leather slippers and indoor moccasins slippers	QB/T 1470 — 1992
Handbags and shoulder bags	QB/T 1333 — 2004
Traveling cases and bags	QB/T 2155 — 2004
Leather wallets	QB/T 1619 — 2006
Leather belts	QB/T 1618 — 2006
Leather gloves	QB/T 1584 — 2005
Leather furniture	QB/T 16799 — 1997

6.Qualification

The qualification of an individual/batch GLM leather product (s) must be judged by its corresponding national quality standard.

7.Genuine Leather Mark (GLM) Label

7.1Specification of the GLM label

There are two types of official GLM labels: Type A (7.0cmX l0.0cm) , Type B (3.5cmX7.0cm) .

7.2Application 0fGLM

Type A is applicable to large leather products such as leather garments and leather goods.

Type B is applicable to leather shoes and other small leather goods.

7.3Labelling of GLM

GLM label must be carried along side its product descriptions label.

8.After-sales service of products

8.1Term of after-sales service

All GLM products should carry a minimum guarantee of 3 months after the date of sale.

8.2Comprehensive arbitration

8.2.1 Any faults appeared during the 3 months guarantee period, under normal

consumption should be considered as faulty product.

8.2.2 Any faults appeared during the 3 months guarantee period, under abnormal

consumption, shall not be considered as faulty product.

8.3Dealing with faulty products

Any faulty product will be dealt with according to after-sales service regulations of either the manufacturers’ or retailers’ .

9.Packaging, transportation and storage

The standard of packaging, transportation and storage of all GLM products should comply with the requirement of their corresponding quality standards.